This listing is for WLL-TR-1p-II Extender kit only. Use description below as a general reference.

The WLL-TR-1p wireless transmitter/receiver system is composed of two units, one WLL-TX1 transmitter and one WLL-RX1p receiver. Additional receivers may be ordered to accompany a single transmitter

Designed to work with all SoundTube speakers (as well as other brands), the WLL?TR-1p system enables the placement of speaker in locations where running speaker wire may be difficult or impossible. Utilizing uncompressed streaming digital audio over 2.4 GHz and requiring only AC power for operation, the SoundTube wireless system provides two 50W channels of audio.

The WLL-RX1p receiver utlizes the exact amplification system of the SA502 mini ampli?fier unit. For additional technical information on the built in amplification provided by the WLL-RX1p, please refer to the SA502 technical data sheet.

Features

• 3 RF channels to minimize interference from other devices
• Each channel contains 3 bands, alternat?ing between them to preemptively counter?act interference, keeping the signal clear and latency less than 20 ms.
• Uncompressed 2-channel audio for max?imum fidelity
• Multiple receiver/amplifier units may be used with a single transmitter.
• Up to 12 receivers may be used for each transmitter. For more than 12, use an addi?tional transmitter on another frequency.
• USB, stereo mini or 1/4" balanced input connections at the transmitter
• Push-On or 1/4" connections speaker level outputs at the receiver. Also includes stereo line output for connecting auxiliary audio components, such as ADA (Ameri?cans with Disabilities Act) adapters.
• Local Audio source at the receiver via stereo mini (mutes the wireless signal when connected)
• High/Low power selector switch on transmitter limits RF range where needed