Audio power amplifiers and digital audio splitters

The 25/70V 50W Audio Amplifier is the ideal solution for supporting a distributed audio system in a classroom, conference room or other environment that requires installation in a plenum space.

The 907 is a high-performance power amplifier for line-level stereo audio signals. It accepts a balanced stereo audio signal on a terminal block connector and delivers 40 watts per channel into an 8- load.

The 907xl is a high-performance power amplifier for line-level stereo audio signals. It accepts a balanced stereo audio signal on a terminal block connector and an unbalanced stereo signal on RCA connectors. It delivers 40 watts per channel into an

The EasyIP AMP D is a half-rack PoE+ powered amplifier featuring Dante networked audio.

The Twin Mono AMP is an 8 Ohm 30 Watt mono power audio amplifier with a single differential input feeding two amplified outputs, each capable of driving into loads as low as 4 ohm.

The A2 subwoofer amplifier is designed to integrate with audio and video pre-amplifiers and receivers that have their own built-in low-frequency crossover circuits, typically containing optional crossover frequency settings such as the ID1 series and SW series subwoofers.

The A3 subwoofer amplifier is designed to integrate with audio and video pre-amplifiers and receivers that have their own built-in low-frequency crossover circuits, typically containing optional crossover frequency settings such as the ID1 series and SW series subwoofers.

The AC-DANTE-AMP-2CH is a combination 25W/RMS (@4 Ω, 12.5 W/RMS @ 8 Ω ) 2-channel local audio power amplifier and Dante Audio/AES67 decoder, supporting sampling rates of 44.1kHz, 48kHz, 88.2kHz, and 96kHz with 16-, 24-, and 32-bit word lengths encoded as either the Dante audio or AES67 format

The Datavideo AD-300 Pro Audio Delay Box allows you to synchronize an audio or mic signal to video.

The AMP-4840 is a compact, economical and energy efficient (Class D) mono / stereo audio amplifier with 3 inputs (2 line in and 1 balanced microphone).

AMP-7040 is a 40 Watt power amplifier (CIass D) with outputs capable of driving 70V or 100V systems (user selectable). It has 2 stereo inputs (3.5mm jack for line in and 2 RCAs for L&R), 1 digital input, and 1 balanced MIC input.

In wall amplifier fits into 2 gang in wall box. 3.5mm connector on faceplate and RJ45 connector to integrate with OWI volume controls and mini mixers.

The AMPMA40X is a small but Powerful Digital Amplifier (Class D), with EQ Control MIC Mixer Function and included IR Remote Control.