The LUM-310X is a 4K HDR Reference Master production monitor with a 31-inch dual layer LCD designed to reproduce reference HDR content at a maximum luminance of 1,000 nits with a simultaneous excellent black minimum of 0.001 nits. The LUM-31 OX comes with 3D LUT(Look-Up-Table) for precise color reproduction and supports various HDR standards(PQ, HLG, SLog3).

Features

• Closed caption
• Blue Only / Mono
  Red and Green channels are not used and only Blue or Monochrome channel is used to display the screen. This function is used to adjust the color tones (tones and saturation) of the screen using the SMPTE Color Bar. For example, after displaying the Blue channel, adjust the Color (or Saturation) and Tint (or Hue) so that the original Magenta and Cyan are of the same brightness, and the original Gray and Blue are of the same brightness.
• H/V Delay
  Allows you to check the Blanking area and synchronize signals by displaying the horizontal and vertical intervals in the center of the screen.
• Marker
  Displays various kinds of aspect ratios on the screen. Wide range of markers and security areas are available with line color and curtain transparency selection. A User Marker is available if any of standard markers fits your requirements.
• User Aspect
  Adjusts the Width /Height display ratio.
• Various Scan Modes
  Controls the size of the image. Overscan: Extra area around the four edges of the image that may not be seen reliably by the viewer. Underscan: Constrains the size of the image so the monitor shows everything the camera is seeing. 1:1 pixel: Displays the original image resolution without scaling to match a certain resolution or an aspect ratio.
• Waveform/Vector Scope
  Waveform Y: Displays the Luma(Y’), Cb, Cr component of the input signal into waveform.
  Vector Scope: Displays the color components ‘B-Y’ and ‘R-Y’of the input signals onto the X-Y axis.
• 1:1 Pixel Mapping Modes for SD/HD
  Displays the original image resolution without scaling to match a certain resolution or an aspect ratio.