The DD-BN31 is a complete wall-mounted Dante audio network interface. It features
two XLR mic or line inputs, one stereo Mini-jack line input and one stereo Mini-jack
line output on the front panels, plus two line outputs on a rear-panel detachable
terminal block. Special software is not required to configure the DD-BN31. Each XLR
input provides three switches that may be set from the front of the unit when the
cover plate is not installed. One switch enables or disables P48 phantom for that
input; the second switch selects the mic or line gain range; the third switch sets
the gain. The Mini-jack input provides a switch to configure the input for stereo or
summed mono. The Mini-jack output provides a switch to configure the output for
stereo or left-channel mono. Each rear-panel output provides a switch to set the
output to balanced professional or unbalanced consumer level. The DD-BN31 fits a
standard US dual-gang electrical box or an RDL WB-2 back box for installations in
thinner European or equivalent walls. The DD-BN31 is PoE powered, and is available
in multiple finishes with optional customized graphics.
The two XLR inputs are each converted to a separate Dante network transmit
channel. Three gain settings are switch-selectable for both the mic and line input
ranges to match condenser or dynamic mic levels and standard line levels.
The Mini-jack left and right inputs are each converted to a separate Dante
network transmit channel. Each input provides a network digital audio level of -20
dBFS for an unbalanced -10 dBV input. The input is equipped with a selector to sum
the left and right Mini-jack inputs. The summed signal feeds both Dante transmit
channels.
Two Dante audio channels are converted to unbalanced line level to feed the front-
panel Mini-jack. Each channel provides -10 dBV unbalanced for a network digital
audio level of -20 dBFS. The left and right Mini-jack channels are normally fed from
Dante receive channels 3 and 4 (stereo). The Mini-jack output is equipped with a
selector to feed both output channels from Dante receive channel 3 (mono). This
selector may be set from the front of the unit when the cover plate is not
installed.
Two Dante audio channels are converted to balanced line level on the rear-panel
detachable terminal block. Each output provides +4 dBu balanced for a network
digital audio level of -20 dBFS. Each output is equipped with a selector to
unbalance the audio and attenuate the level to -10 dBV. These switches are located
on the top of the chassis and are set by the installer prior to mounting the unit.
The rear-panel outputs are intended for connection to RDL AMS connectors mounted
in Decora-style plates that match the DD-BN31. AMS audio connectors include RCA,
Mini and XLR jacks. The output plate may be located together with the DD-BN31 in a
triple gang box or may be mounted remotely in a single box.
Valid PoE power and synchronization to the Dante network are indicated by green
LEDs visible from the front of the unit.
The DD-BN31 is a professional grade product with discrete mic preamplifiers for
studio quality fidelity and low noise performance, coupled through metal XLR jacks
housed in a stainless steel chassis with dual powder-coated or stainless steel
Decora front plates.
The DD-BN31’s superior performance specifications make it ideally suited to
the most demanding installations, and an exceptional value in commercial networked
audio systems. This full-featured product is engineered and manufactured in the
U.S.A for continuous duty in demanding installations. Designed to outperform. Built
to last.
Features:
- Dante Network Interface for Four Audio Inputs and Four Audio Outputs
- One Mini-jack and Two XLR Front-Panel Inputs
- One Mini-jack Front-Panel Output; Two Outputs on Rear-Panel Terminal Block
- Converts Two Standard XLR Mic or Line Audio Sources to Dante Network Channels
- Each XLR Input is Switch Selectable for Mic or Line
- Switch-Selectable Mic Gain: 40 dB, 48 dB or 62 dB
- Switch-Selectable 48 V Mic Phantom (P48)
- Switch-Selectable Line Gain: Unity, 12 dB or 19 dB
- Mini-jack -10 dBV Input is Switch Selectable Stereo or Summed to Mono
- Converts Four Dante Network Audio Signals to Line Level
- Mini-jack -10 dBV Output is Switch Selectable Stereo or Mono (Left Channel)
- Rear Panel Outputs Switch Selectable Balanced +4 dBu or Unbalanced -10 dBV
- Special Software Not Required for Module Setup
- Studio Quality, Low-Noise Performance
- High Resolution 24 Bit Analog to Digital and Digital to Analog Conversion
- Legendary RDL Analog Filtering Enhances Superb Audio Performance
1.888.902.3309
LIVE CHAT
