Audio
Audio The system delivers 8 channels of HDMI audio with sample sizes of 16, 20 or 24bit at 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, or 192kHz.
Approvals / Compliance
Standards
HDMI interface The system supports resolutions such as 480p, 720p, 1080p or WUXGA (1920 x 1200) @ 60Hz (with reduced blanking) and 24bit color depth.
Hardware compatibility: All computers with HDMI connections.
Cable Guidelines
Important extension distance Information:
Recommended cables are CAT7 shielded foiled twisted pairs:
- Daetwyler 7702 Flexible patch cable
- Daetwyler 7120 Bulk Cable.
CAT6 (or better) shielded twisted pair cable must be used to connect the local and remote units in order to maintain compliance with radio frequency energy emission regulations and ensure a suitably high level of immunity to electromagnetic disturbances.
Resolution |
Frequency |
Patch Connections |
Cable Type |
Distance |
1920x1200 |
60Hz |
0 |
CAT7a |
50 metres |
1920x1200 |
60Hz |
0 |
CAT6a (shielded) |
50 metres |
1920x1200 |
60Hz |
2 |
CAT6a (shielded) |
40 metres |
1920x1200 |
60Hz |
2 |
CAT7a |
40 metres |
Note: Distances are achieved using single lengths of trunk/bulk cable. For each break/patch connection reduce distance by 5m. Preferably patch cables should be of type CAT7 and less than 2m.
Environmental
Operating Temperature: 0 to 40ºC / 32 to 104ºF
Connectors – Local Unit
Computer connections at transmitter (TX) HDMI type A male, USB type A (for power only)
Connectors – Remote Unit
Display connections at receiver (RX) HDMI type A male
Mechanical
Injection molded ABS cases:
45mm / 1.8’’ (w) x 63mm / 2.5’’(d) x 21mm / 0.8’’(h) with 30cm / 12” pigtails
Weight 250g / 0.6 lb per pair
Power
USB powered, 5VDC -2.5W for both RX and TX units combined
Software
Compatible with all known operating systems