| Mixer Aux Input |
| Line Input Configuration/Impedance: |
1/8" Stereo, unbalanced, 10K ohms typical |
| Line Input Level: |
0 dBu optimal, +18 dBu max |
| Mic Input Configuration/Impedance: |
XLR Mono, balanced, 150 ohms typical, 150 Hz high pass |
| Mic Input Level: |
-42 dBu optimal, -30 dBu max |
| Mixer Headphone Power |
| Load Impedance: |
THD less than 0.01%* |
THD less than 0.1% |
| 8 Ohms: |
1.2 W* |
1.5 W |
| *THD AT 8 Ohms = 0.015% typical |
| 16 Ohms: |
1.6 W |
1.8 W |
| 25 Ohms: |
2.0 W |
2.2 W |
| 32 Ohms: |
1.8 W |
2.0 W |
| 50 Ohms: |
1.5 W |
1.6 W |
| 100 Ohms: |
1.1 W |
1.2 W |
| 200 Ohms: |
500 mW |
650 mW |
| 600 Ohms: |
220 mW |
250 mW |
| IMD: |
Typically Less than 0.03% |
| Mixer Line Output |
| Freq Response: |
20 Hz to 20 KHz, +/-0.15 dB |
| THD+N: |
0.004% typical at 1 kHz, +15 dBu |
| 0.008% typical, 20 Hz - 20 kHz, +4 dBu |
| IMD: |
0.02% typical at +4 dBu, 60 Hz / 7 kHz |
| Crosstalk: |
Less than -93 dB @ 1 kHz |
| Propagation Delay: |
| - Analog Input to Analog Output: |
0.248 mSec @ 192 kHz sample rate |
| - Digital Input to Analog Output: |
0.092 mSec @ 192 kHz sample rate |
| - Digital Input to Digital Output: |
0.0452 mSec @ 192 kHz sample rate |
| - Audio over Ethernet Protocol (HBUS): |
0.000592 mSec |
| System Noise Performance |
| Noise, A-Weighted: |
-93 dBu @ 192 kHz sample rate |
| Dynamic Range: |
117 dB typical |
| System I/O |
| Hub Line In, Analog: |
8 balanced inputs on a DB-25 female (DA-88 pinout) per Analog Card |
| Hub Maximum Input Level, Analog: |
+8 dBu with analog card pad jumpers populated, +18 dBu with jumpers removed (up to +38dBu upon special request) |
| Hub HBus In, Out: |
8-pin RJ45 jack (standard Ethernet pinout) |
| Hub USB Port: |
USB 2.0 (for firmware updates and editing configuration settings) |
| Hub Card Slots (4x): |
Each slot can accept an analog or digital input card, output card, or 8 port Mixer network card |
| Mixer to Hub Connection: |
8-pin RJ45 jack (8x Mixer connections per network card) |
| Mixer Headphone Out: |
1x TRS 1/4" and 1x TRS 1/8" unbalanced stereo |
| Mixer Line Out: |
2x TRS 1/4" balanced (left/mono and right) |
| Mixer Max Output Level, Analog: |
+24 dBu (mixed output) |
| Mixer Aux Input: |
1x TRS 1/8" unbalanced stereo and 1x XLR balanced mono (with 15 volts phantom power) |
| Mixer Card Slot: |
For future digital or analog input/output expansion capabilities or side-car add-on |
| Physical, Mixer |
| Size: |
9.5" (241 mm) H x 5.95" (152 mm) W x 2.71" (68.8 mm) D |
| Unit Weight: |
1.6 lb. (0.72 kg) |
| Mounting: |
Standard mic stand (5/8" 27 threads per inch) or desk mounted |
| Physical, Hub |
| Size: |
1.75" (44.5 mm) H x 19" (483 mm) W x 8.5" (216 mm) D |
| Unit Weight: |
6.3 lb. (2.8 kg) |
| Mounting: |
Standard rack mount, 1 RU |
| Power |
| Hub Power Requirements: |
48VDC, 150 Watts (each external power supply powers up to 16 Mixers)** |
| Mixer Power Requirements: |
Power over Ethernet (PoE) 36-52 volts DC, 15 Watts max provided by Hub through Cat5e/6 network cabling |
| External Power Supply Requirements: |
Input Voltage: 90VAC to 264VAC 50/60 Hz |
1.888.902.3309
LIVE CHAT
