- Cameras and Streaming
- Switchers
- Amplifiers and Splitters
-
Extenders
- HDMI Extenders
- Wireless HDMI Extenders
- DisplayPort Extenders
- DVI Extenders
- Composite/S-Video Extenders
- VGA Extenders
- Component Video Extenders
- USB Extender - Wireless and Cable
- Firewire Extenders
- 3G/HD/SD-SDI Extenders
- Ethernet Extenders
- Audio Extenders
- RS232 and IR Extenders
- Control Systems
- Other Extenders and Accessories
- KVM Extender
-
Converters and Scalers
- HDMI Video Converter
- DVI Video Converter
- VGA Video Converter
- Component Video Converter
- Composite Video Converter
- Displayport Video converter
- SDI Video converter
- RGBHV Video converter
- PC to TV Converters
- PAL to NTSC Converter
- Video Test Signal generator
- Video Encoder and Video Decoder
- Test monitor and Displays
- Specialty A/V Products
- Edge Blenders
- Video Over IP
-
Cables
- Adapters
- HDMI Cables
- HDMI DVI Cables
- DVI Cables
- DVI/HDMI Cables Over 70 ft
- DisplayPort Cables
- Audio Cables
- VGA/SVGA Cables
- VGA Breakout Cables
- Component Video Cables
- S-Video Cables
- AV Composite Cables
- Fiber Optic Link Cables
- CAT5/CAT6 Cables
- RapidRun and Easy Pull Cables
- Plenum Cables
- USB Cables
- IR Cables
- Bulk Coaxial Cable
- Scart Cables
- Other Cables
- KVM Cables
- SDI Cables
- SDI Cables
- SDI Cables
- SDI Cables
- SDI Cables
- SDI Cables
- SDI Cables
- SDI Cables
-
Audio and Accessories
- Stereo Audio preamplifiers
- Speaker Selectors and Volume Controls
- Speakers (outdoor, ceiling, in-wall, on-wall)
- Audio power amplifiers and digital audio splitters
- Speaker Wall Plates
- Speaker Cable
- Mounting Brackets
- Microphones
- Audio Converters and audio mixers
- Other Audio Equipment
- Mixers
- Headphones
- Portable PA Systems
- Subwoofers
- Video Walls and Multiviewers
- Digital Signage
- TVs
- Other AV Equipment
RDL
Sort by:
Name A - Z
-
ACM-3 Amplitude Component Monitor by RDL
RDL's® ACM technology is the only time-proven, industry accepted method of controlling Synchronous AM Noise (the elusive FM transmission bandwidth variations that aggravate multipath artifacts in listeners' receivers).SKU: ACM-3
Brand: RDL -
AMS-TS1 Illuminated Touch-Activated Pushbutton by RDL
The AMS-TS1 is a touch activated electronic button with integral controller. It operates in one of three modes: Toggle (touch on, touch off), Momentary (active while touched, otherwise inactive), or Pulse (125 mS active pulse upon each touch). By default, the center of the button illuminates green when the output is active, red when the output is inactive.SKU: AMS-TS1
Brand: RDLOut of stock
-
AV-DC4 Line-Level Audio Divider/Combiner by RDL
The AV-DC4 is a mono transformer-coupled audio divider/ combiner module for use with balanced, low or high impedance audio inputs and outputs. Input and output connections are provided on XLR jacks with gold-plated contacts. The AV-DC4 features fourSKU: AV-DC4
Brand: RDL -
AV-HK1 HUM KILLER Stereo Audio Isolation Module by RDL
The AV-HK1 is a stereo transformer isolation module for use with unbalanced, high impedance audio inputs. Input and output connections are provided on gold-plated phono jacks.SKU: AV-HK1
Brand: RDL -
AV-HK1X HUM KILLER Audio Isolation Transformer/XLR input and output by RDL
The AV-HK1X is a mono transformer isolation module for use with a balanced, low impedance source and either a low or high impedance load. Input and output connections are provided on XLR jacks with gold-plated contacts.SKU: AV-HK1X
Brand: RDLOut of stock
-
AV-LN4 Line Level Audio to Network Interface by RDL
The AV-LN4 is an interface that converts four line-level XLR inputs to Dante network audio channels. Special software is not required to configure the AV-LN4.SKU: AV-LN4
Brand: RDLOut of stock
-
AV-NH1 Network to Stereo Headphone Amplifier by RDL
The AV-NH1 is a headphone amplifier that converts two Dante network audio channels to a stereo headphone output with front-panel level adjustment. The outputs connect through a stereo 3.5 mm Mini-jack or ¼” (6.35 mm) jack.SKU: AV-NH1
Brand: RDLOut of stock
-
AV-NL2 2 Dante network audio channels to 2 balanced audio outputs Converter on XLR connectors by RDL
The AV-NL2 is a line-level interface that converts two Dante network audio channels to two balanced audio outputs on XLR connectors. Each channel provides +4 dBu balanced for a network digital audio level of -20 dBFS.SKU: AV-NL2
Brand: RDLOut of stock
-
AV-NL4 Network to Audio Interface by RDL
The AV-NL4 is a line-level interface that converts four Dante network audio channels to four balanced audio outputs on XLR connectors.SKU: AV-NL4
Brand: RDLOut of stock
-
AV-XMN4 4 XLR microphone inputs to Dante network audio channels Converter by RDL
The AV-XMN4 is an interface that converts four XLR microphone inputs to Dante network audio channels. Special software is not required to configure the AV-XMN4.SKU: AV-XMN4
Brand: RDLOut of stock
-
D-A2 Line Output Audio Extender/RCA jacks/Terminal block by RDL
The D SERIES-A2 is a passive audio output assembly that provides one or two unbalanced consumer level audio outputs from a balanced line-level audio source. It may be connected to the +4 dBu line level output of any RDL product, even if that output iSKU: D-A2
Brand: RDL -
D-AVM4 Audio and Video Extender/Jack Panels by RDL
The D/S-AVM4 is the ideal choice in installations requiring a wall-mounted audio and video monitor input or output plate for computers, monitors and projectors. The panel is typically installed as an audio/video input plate, but may equally be used aSKU: D-AVM4
Brand: RDL -
D-BT1A Wall-Mounted Bluetooth Audio Extender (Transmitter)/Format-A Interface by RDL
The D SERIES-BT1A modules are Bluetooth audio receiving modules compatible with RDL® Format-A twisted pair receivers. When paired with a compatible Bluetooth enabled devices, the module receives stereo audio from the Bluetooth source.SKU: D-BT1A
Brand: RDLOut of stock
-
D-BZR Piezo Alert Module - Wall-Box by RDL
Rear-panel terminals permit connection of a trip signal, a remote reset button, external power supply, and a jumper to set the audible alert level. The D-BZR is activated when the TRIP input is momentarily connected to ground.SKU: D-BZR
Brand: RDLOut of stock
-
D-CIJ3 Consumer Audio Extender Input Jacks/Mono by RDL
The D/S-CIJ3 is the ideal choice in installations requiring the passive mixing of two unbalanced line level audio sources to feed a mono balanced (or unbalanced) audio line.SKU: D-CIJ3
Brand: RDLOut of stock
-
D-CIJ3D Consumer Audio Extender Input Jacks/Stereo by RDL
The D-CIJ3D is the ideal choice in installations requiring stereo unbalanced line level audio sources to feed stereo balanced (or unbalanced) audio lines.SKU: D-CIJ3D
Brand: RDL -
D-HA1A Format-A Stereo Headphone Amplifier with Guest Room Audio System by RDL
The D SERIES-HA1A is a two pair receiver and audio headphone amplifier compatible with RDL Format A twisted pair products. Each -HA1A receives stereo audio and 24 Vdc power through a rear-panel RJ45 jack fed from a Format-A sender.SKU: D-HA1A
Brand: RDL -
D-HPA3 3.5 Watt Audio Power and Headphone Amplifier by RDL
The D SERIES-HPA3 is a high efficiency 3.5 W power amplifier with one line input, an amplified output to drive a 4 or 8 ohm speaker and a separate headphone amplifier.SKU: D-HPA3
Brand: RDL -
D-J1 Microphone Input Assembly - XLR/Terminal block by RDL
The D SERIES-J1 is a complete microphone input panel assembly. Connections to the female front‑panel XLR jack are made on a rear barrier block. Four terminals are provided: CASE GROUND, SHIELD (XLR pin 1), + (XLR pin 2) and - (XLR pin 3).SKU: D-J1
Brand: RDL -
D-J2 Line Input Assembly - RCA jacks/Terminal block by RDL
The D SERIES-J2 is a complete unbalanced audio input panel assembly. The front panel features two phono jacks intended for mono or stereo consumer level sourcesSKU: D-J2
Brand: RDL