This listing is for C-USB-LAN-RX-US Receiver only. Use description below as a
general reference.
ADDER C-USB-LAN is a high performance USB extender that enables you to locate
your critical computing hardware away from the user work station whilst maintaining
the original user desktop experience. It can transmit USB2.0 over a single CATx
cable or via an 1GbE IP network:
- Transparent USB2.0 operation
- 100m extension distance
- Switchable and routable
- USB2.0 Hi-speed for mass storage devices plus:
- USB2.0 (low and full speed) for keyboard, mouse, tablet and touch screen
- Supports USB3.0 controllers
- Isochronous support for audio devices and web cams
- Plug and play
USB 2.0
Enables connection of any USB human interface device - from mice and keyboards
through to touch screens, graphics tablets, jog shuttles, joysticks and 3D
explorers. Mass storage devices and isochronous devices such as webcams and headsets
can also be used.
Transparent operation
Once connected, operation is totally transparent to the host system, the USB
peripheral(s) and you, the user. There are no drivers to install and your USB
devices work precisely as they did before; the only
difference is that they are now up to 100 meters away from the host. There is no
need for drivers or software to be installed.
Plug and Play
Adder C-USB-LAN extenders are delivered in a zero config state so you can plug
the units in and start working with them straight away. When supplied as pairs, they
are already synchronized, so they will locate each other automatically over your
network.
Integrated A.I.M. control
The C-USB-LAN can be controlled and switched via the AdderLink Infinity Manager
(A.I.M.), or it can operate separately, as a point to point USB extender using a
single length of CATx cable.
API
An API is available, supporting all functionality to which authorized 3rd party
control systems can interface.
Support for audio devices
With Isochronous support the C-USB-LAN will work with USB microphones and
headsets as well as web cams.