The UHBX-SW3-WP is a multi-input Switcher/Sender with HDBaseT™ output. The wall-
plate accommodates 2 HDMI and 1 VGA inputs with audio. The HDMI 1input also
supports MHL (Mobile High-Definition Link) with phone-charging feature to allow
video presentation from a smart-phone using just a passive cable.
input also accepts YPbPr Component video. The sender can manually or automatically
switch between the various inputs and extends the video using HDBaseT™ standard. To
control the power on/off function of the remote display, the wall-plate can generate
RS232, and IR control signals which are extended using the same Cat6 cable.
Virtually all VGA and HDMI resolutions are supported including 4K (UHD). 4K video
can be extended to 330 ft (100m) while 1080p signals can go as far as 500 ft (150m).
The wall-plate is powered through the same cable from the receiver using PoH (Power-
over-HDBaseT) standard, making installations as simple as possible. The UHBX-R-PSE
receiver includes a small power supply and provides HDMI, RS-232 and IR outputs.
To ensure a proper image on the display, the wall-plate's VGA input is scaled
to 1080p. This eliminates compatibility issues with various notebook or PC VGA
formats that may not be displayable on an HDMI TV if not scaled to a standard HDTV
resolution such as 1080p. The user can also configure the unit to pass-through 3.5
mm audio input from an MP3 audio player independent of the VGA signal.
system can manually or automatically control the power on/off function of the remote
display. If a video is detected on the input, in automatic power mode, the wall-
plate will issue the desired ON command, and if there is no video, it can issue an
OFF command after a programmed delay. The power commands can be RS232, IR, or CEC
based on the user's needs. To select the control method and to enter the commands, a
USB port is provided on the wall-plate for programming using Hall Research's
free Windows® GUI software. In addition, the wall-plate features an IR detector
that can extend IR signal to the remote receiver. In this way, an IR remote can be
pointed to the wall-plate and its signal will be extended to the TV.
UHBX-SW3-WP complies fully with HDBaseT Alliance's design specifications and may be
connected to displays or projectors with HDBaseT inputs without the external
receiver. In that case, a PoH compliant power inserter would be needed to power the
The UHBX-SW3-WP is a culmination of Hall Research's expertise
in high-definition analog and digital video scaling and extension technologies and
is fully designed and manufactured in the USA.
- 3 inputs handle VGA, Component, HDMI (or DVI), and even MHL
- Supports phone charging feature if MHL source is detected
- VGA input is
scaled to 1080p or user specified output resolution to ensure proper image
- Supports all HDMI resolutions including 4K (UHD)
- Can scale HDMI output
- Uses only one Cat6
- Distance to 500 ft (150m) at
1080p, or 330 ft (100m) at 4K resolution
- Manual or automatic input
- IR Extension
- Can issue its own RS-232, IR, or CEC
command to turn display On or Off
- Display power control can be manual or
- Wall plate does not require separate power supply, powered using
PoH through the same Cat6 cable
- USB port for configuration (including
display power on/off control methodology)