FlexPro Yagi/Panel Kit - Model SC-DualH/O-72-YP-KIT - 72dB dual-band manually adjustable booster kit for areas up to 6,000 sq. ft. Kit includes 30 ft and 75 ft of SureCall 400 low loss coax cable, outdoor yagi antenna, and indoor panel antenna.
Designed for home and office use the FlexPro kit offers a full array of cell phone signal booster solutions. These competitively priced booster kits provide enhanced 2G and 3G voice and data reception for an area of 100 feet up to 6,000 square feet where reception is weak due to to distance from tower, topography, building materials or structural design. Fully configurable for all indoor environments, FlexPro signal boosters work with all major U.S. carriers and its compartmentalized design ensures enhanced call clarity for up to 10 simultaneous users. Our three-year warranty is a testament to our product quality and durability.
- Independently reconfigurable for each band
- Dual Embedded CPU for smarter technology
- Eight RSSI detectors for all inputs and outputs
- Stealth technology incorporated – uplink becomes dormant when not in use, providing green, power saving operation
- FCC certified for new regulations and technical standards
- Auto Gain Control (AGC) and manually adjustable dB gain and attenuation
- Automatic shut down
- Supports all 2G and 3G standards
- Quality metal construction, durable and resilient
- Lowest Out of Band Emissions (OOBE) to date
? FCC Certified for new rigid protection standards
? CM400 coax cable is certified a the optimum length to ensure maximum performance with minimal loss
? Built in safeguard completely eliminates interference to cell tower
? Approved by all major US carriers
? Simple, Plug and Play operation
|Frequency ||Uplink: 824-849/1850-1910 Mhz; Downlink : 869-894/1930-1990Mhz |
|Input Impedance ||50 ohm |
|Average Gain ||65dB Cellullar / 65dB PCS |
|Maximum Gain ||65dB Cellular/ 72dB PCS |
|VSWR ||<2:0 |
|Standard Supported ||CDMA / WCDMA, GSM, EDGE,TDMA, etc. |
|AC Power Transformer ||Input AC110V,60Hz; Output DC 5-15V |
|DC Power ||12V/6V |
|Maximum RF Output Power ||1 Watt EIRP |
|Noise Figure ||5dB |
|Cable ||CM400 recommended |
|RF connectors ||N Female connectors on both ends |
|Power Consumption ||<20W |
|Dimensions ||8” x 5" x 1" |
|Weight ||1 lb, 8 oz |
The signal is received by the outside antenna from the cell tower, then AMPLIFIED and transmitted to your phone through the inside antenna. When the phone transmits, the signal is received by the inside antenna, then AMPLIFIED and transmitted to the cell tower through the outside antenna.
1. Mount outside antenna (mounting kit with stucco screws provided)
2. Using CM400 cable, connect the dome antenna to the side of amplifier marked OUTSIDE
3. Mount dome antenna on the ceiling
4. Using CM400 cable, connect the dome antenna to the side of amplifier marked INSIDE
5. Connect the Power Cord (make sure the booster's power switch is in the OFF position).
6. Turn on the booster's power switch. The LED light will glow, indicating that the booster is ready to use.
Note: Make sure Inside and outside antenna are 60' apart
Optimizing Reception Using Dials:
Step 1: When you receive the booster, the Cellular (800 MHz frequency) dial on the left and the PCS (1900 MHz frequency) dial on the right should be each set at 65dB. If the ALERT light turns on for either band's dial, it means that the booster is oscillating on that band. If this happens, turn down the respective dial by 5dB, or for example, from 50 to 45. The ALERT lights will flash for 20 seconds, the booster will automatically shut down, then restart.
Step 2: If the ALERT lights for either band continue to blink, turn the respective blinking knob down by
another 5dB or until the light stops flashing.
NOTE: During this process of adjusting dBs for either band, continually monitor the bars on your cell
phone to see if the reception improves
Booster Kit Contents:
All FlexPro kits include low dB loss CM400 coax cable.
FlexPro Yagi/Panel Kit - Model SC-DualH/O-72YP-KIT: Outside Yagi antenna (Yagi antennas are designed to reach towers that are up to 30 miles away) with interior panel antenna (Panel antennas allow for optimum reception to targeted areas), 30' x 75' CM coax cable
SC-DualH/O-72-YD-KIT: Outside Yagi (Yagi antennas are designed to reach towers that are up to 30 miles away) Antenna with inside dome antenna (Dome antennas are best suited for a central location ), 30' x 75' CM coax cable
SC-DualH/O-72OP-KIT: Interior omni antenna (ideal for topographies with minimal obstacles) with interior panel antenna (Panel antennas allow for optimum reception to targeted areas ), 30' x 75' CM coax cable
SC-DualH/O-72 OD-KIT includes: outside omni antenna (Omni antennas are ideal for topographies with minimal obstacles) , interior dome antenna (Dome antennas are best suited for a central location), 30' x 75' CM coax cable
This is a CONSUMER device. BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider’s consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20cm (8 inches) from any person. You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider. WARNING. E911 information may not be provided or may be inaccurate for calls served by using this device.