Utilizing the best in HDBaseT technology, the RX-700 extends 5-Play functionality to your display device over 100m/328ft of Cat 6 cable. Using DSC (display stream compression) the RX-700 can support HDMI video up to 2160p 4:4:4 at 60Hz without any visual loss in quality or latency. With HID’s and data transfer in mind, the RX-700 supports data transmission of USB 2.0 devices like HD webcams, smart whiteboards and flash drives alike.

CLASS C HDBASET

Featuring the powerful HDBaseT 2.0 specification, UHD video & audio, Ethernet, control, USB and PoH are sent over distances of 100m/328ft. VESA recognized DSC at the point of transmission means lossless compression for HDMI & DP++ signals up to 18Gbps.

HDMI 2.0 MAXED OUT!

Sporting an 18Gbps HDMI input, the RX-700 can support all UHD video signals up to and including 2160p 4:4:4/60, and high frame-rate HDR 12bit 4:2:2 up to 60Hz, along with multichannel audio up to DTS:X and Dolby Atmos.

USB 2.0 PASSTHROUGH

HDBaseT™ 2.0 affords the addition of USB 2.0 pass-through, offering not only KVM functionality for extension of a keyboard/mouse or touchscreen but also full data transfer capabilities of 190Mbps for webcams or USB peripherals.

DEDICATED AUDIO LANE

Running in parallel to and completely separate to the HDMI signal within the HDBaseT link, the RX-700 can also support the bi-directional transmission of 2 separate stereo audio feeds, to and from the RX-700.

Features:

• HDBaseT Receiver supporting:
  • Content up to 4K/60 4:4:4 & RGB 8-bit
  • The latest HDR standards, including HDR-10, HLG and Dolby Vision at 30Hz
  • HDCP 2.3 encryption technology ensuring compatibility with the latest 4K UHD content and sources
  • HD Multichannel audio up to DTS:X and Dolby Atmos to all outputs
  • 2160p 4:4:4 or 4:2:2 12-bit HDR content from a source to a display or projector using HDBaseT up to 100m/328ft
• Automatically activated DSC lossless compression handles HDMI content up to 17.8Gbps
• HDMI output supports bandwidths of up to 18Gbps
• Compatible with DVI-I and DP++ v1.3 signals from compatible devices
• Bidirectional USB 2.0 passthrough offering 190Mbps transfer and HID extension
• Features 4 USB device ports
• 10/100 Ethernet port for extension of LAN from TX
• Bidirectional audio lane separate to HDMI signal sends and receives analog audio signals at either end (requires supporting TX device)
• Bidirectional IR, RS-232 and CEC communication
• DIP Switch selection for direction of USB control, long cable mode and firmware update
• Backwards compatible with HDBaseT 1.0 transmission and receiving devices (lowest denominator takes priority)
• LED indication for power supply to units, signal status to show established display connection, HDCP presence in signal and transmission link
• 2-way PoH (Power over HDBaseT) enables the receiver to be remotely powered by the transmitter or power a transmitter
• Locking DC power jack
• 12v DC PSU with US, UK, EU & AU Power cables included
• Mounting brackets included