This listing is for KD-X411POHK Extender kit only. Use description below as a general reference.

KD-X411ProK/KD-X411POHK HDBaseT/HDMI (Tx & Rx) Extenders are an HDCP 2.2 compliant product that extend 4K/UHD 24/25/30 (4:4:4) and 4K/UHD 60 (4:2:0) signals up to 150 ft. using Key Digital® KD-CAT6STP1X Super CAT6A Shielded cable, or up to 125 ft. using a single third-party CAT5e/6 cable. 1080p/60, 1920x1200, 3D signals are extended up to 250 ft. via single Key Digital® KD-CAT6STP1X Super CAT6A shielded cable, or up to 230 ft. using a single third-party CAT5e/6 cable. In addition to HDMI video and audio signals, KD-X411ProK/POHK carries IR, RS-232 and TCP-IP signals for controlling remotely located equipment. Audio de-embed ports on the Tx unit enable external audio connectivity with audio distribution systems and amplifiers.

Features

• HDBaseT via Single CAT5e/6 UTP/STP Extension: With fully automatic adjustment of feedback, equalization, and amplification depending on cabling length
• Signal Extension:
  • Up to 150 ft. @ 4K/24/25/30/60 using KD-CAT6STP1X cabling
  • Up to 125 ft. @ 4K/24/25/30/60 using third-party CAT5e/6 UTP/STP
  • Up to 250 ft. @ 1080p/1920x1200 using KD-CAT6STP1X cabling
  • Up to 230 ft. @ 1080p/1920x1200 using third-party CAT5e/6 UTP/STP
• 4K/Ultra HD Resolution: Support for 4096x2160 or 3840x2160 24/25/30Hz at 4:4:4/8 Bit or 60Hz at 4:2:0/8 Bit
• Audio De-Embedding: Audio from the HDMI input is de-embedded through the Coax digital (PCM) and/or Analog L/R audio output
• HDMI® and HDCP Licensing: Fully licensed and compatible with all HDMI and HDCP technologies up to HDCP 2.2 and HDMI 2.0 4:2:0/8 Bit profile
• EDID Control: Internal library features 15 default EDID configurations and native EDID data from Output/Display devices connected via Rx
• Hot Plug Detection Control: Enables integrator to choose if active signal voltage is forced to connected input devices
• Full Buffer System™: Manages TMDS re-clocking / signal re-generation, HDCP authentication with source & display, and EDID Control handshake, Hot Plug control
• IR Sensor: Sensor powering via +5V on Rx unit’s IR In port collects line-of-sight IR from remote(s) without external IR connecting block
• Up/Down IR: Two channels of IR enable control to/from devices connected to Tx and Rx units
• RS-232: Bi-Directional control to/from Tx and Rx unit on 3.5mm connector
• Rotary Switch RS-232 Control Mode: Provides control of Tx unit
• 3D: Support for standard 3D stereoscopic signal formats
• Deep Color Support: 12bit Deep Color video / 8bit color for 4K/UHD.
• Lossless compressed digital audio: Support for Dolby® TrueHD, Dolby® Digital Plus and DTS-HD Master Audio™
• CEC Support: For inter-device control between main input and output HDMI channel
• I2C Communication: EDID and HDCP authentication to Display and Source
• Control System Support: Compatible with Compass Control®, AMX®, Control4®, Crestron®, RTI®, Savant, URC®, Leviton® etc.