This listing is for IPD-SM52-
EZ-BK
only. Use description below as a general reference.
center>
This listing is for IPD-SM52-
EZ-BK
only. Use description below as a general reference.
center>
The IPD-SM52-EZ is a 5.25-
inch, two-way surface-mount speakers for
IPaddressable audio networks on the Dante platform.
It incorporates a 5.25-inch polyproplyene woofer and
1-inch soft dome tweeter in an injection-molded
enclosure. The speaker delivers a frequency response
of 55 Hz – 22 kHz (-10 dB) with consistent, broad
high frequency dispersion supplied through
SoundTube’s proprietary BroadBeam Ring®
technology. Power, audio and control are delivered
to the speaker via a CAT5 or CAT6 cable; connection
on the other end is made to the STNet-Switch, which
provides 40 watts PoE (Power over Ethernet) to each
speaker. Configuration of the speaker is done via
software. Should any problems occur with the speaker
during operation, it will be reported immediately
via SoundTube monitoring software.
Designed for indoor and damp outdoor background
to mid-level SPL surface-mount applications. The
system includes a detachable mounting bracket
designed for premounting in surface-mounting
applications. The full frequency dispersion pattern
and high sensitivity make the IPD-SM52-EZ surface-
mount speaker ideal for music and paging in retail,
amusement, restaurant, airports, hotels, schools and
casinos.
SoundTube Entertainment and the MSE Audio Group
are constantly developing new technologies that
enhance audio product performance. SoundTube
Entertainment innovations are protected by multiple
U.S. and international patents, which explicitly
cover SoundTube dome, enclosure and dispersion
technologies. The MSE Audio Group actively defends
its patents in order to protect SoundTube resellers
and end users.
SoundTube Entertainment strives to provide
complete and effective technical information and
data to dealers, engineers and designers. All data
are available from SoundTube Entertainment or at
www.soundtube.com. Technical data and downloads
include: EASE™ data – 3-D polar plots. EASE™
Address – 2-D modeling for distributed systems Tech
Sheets – Technical information and architectural
specs for system engineers SoundTubeSPEC™ –
Proprietary speaker placement software.
All data for SoundTube speakers is independently
collected and verified by a third party. All data is
collected and analysed according to ASTM, ISO and
AES standards using EASERA, TEF and MLSSA. Full
balloon data including both phase and magnitude is
compiled into a variety of formats including EASE
4.x, GLL and CLF.
The loudspeaker shall consist of a 133.0 mm (5.25
in) low-frequency transducer and a 25.0 mm (1.00 in)
high-frequency transducer with a frequency-dividing
network installed in a vented enclosure. The
lowfrequency voice coil diameter shall be 25.4 mm
(1.00 in). The high-frequency transducer shall be
constructed of silk material with a proprietary
BroadBeam RingTM waveguide. Performance
specifications of a typical production unit shall be
as follows: Useable frequency response shall extend
from 55 Hz – 22 kHz (-10 dB, half space,
independently verified). The frequency-dividing
netwrork shall have a crossover frequency of 3.5
kHz. The unit shall accept 40 watts PoE in addition
to PoE plus and standard PoE, as well as the audio
signal from a provided network switch, and shall be
configurable via software. Maximum continuous output
at 1 meter with a 40 watt input shall be 97dB.
Installation and safety attachment for the speaker
shall be by U-bracket affixed to the speaker chassis
with steel insert. For safety redundancy, a
secondary cable shall be included and attached to
the speaker chassis. The external wiring input
connector shall be via RJ45 ethernet port, accepting
standard RJ45 ethernet cable. The system shall be
for indoor/outdoor applications and shall include a
weather resistant cover over all wire connections.
The enclosure shall be constructed of injection-
molded, High Impact Poly Styrene (HIPS). The grille
shall be constructed of powder-coated aluminium for
lasting performance. Overall cabinet dimensions
shall be no more than 301.8 mm (11.88 in) in height
by 190.5 mm (7.50 in) in width by 168.4 mm (6.63 in)
in depth (without SM bracket). The unit shall
include port plug, allen wrench and watertight
strain-relief bushing. The system shall be the
SoundTube IPD-SM52-EZ for audio over IP Dante™
applications.
Features:
- STNet IP-addressable, self powered (PoE)
speaker.
- Dante™ I/O for interconnectivity with Dante-
enable audio systems.
- BroadBeam RingTM delivers a consistent
dispersion pattern up to 10 kHz for maximum coverage
area per speaker.
- One 5.25 inch (133 mm) polypropylene woofer
and one 1.0 inch (25 mm) soft dome tweeter.
- Fast connection of power, audio and control
functions via one CAT5 or CAT6 cable.
- 40 watts PoE provided by SoundTube STNet
Switch; also works with Standar PoE plus and PoE
switches.
- Provides report-back on any problems via
SoundTube software.
- Aluminum grille with powder-coat finish.
- Vertical and horizontal mounting offer
precision aiming for indoor and outdoor
applications.
- UL 60065 listed.
- High-quality black or white paint finish.
li>
- Included Accessories: Safety cable, wall
mount bracket, port plug, allen wrench and
watertight strain-relief bushing.