EMX-DVI automatically compensates for signal degradation in long cables. Input
cable length can be up to 50 ft (15 m), and the unit can drive long DVI Cables on
its output to 40 ft (12 m) by boosting the DVI video output.
The DDC channel (for EDID and HDCP) can either be bypassed through the EMX-DVI
(source "sees" the connected LCD), or Emulated, where the EDID is supplied from
internal EDID memory in the EMX-DVI. When EDID is Emulated HDCP is turned off
(forcing the source to send non-content protected video without HDCP). Using the
learn button, you can copy and store EDID from any HDMI or DVI LCD in to the
internal EDID memory of the EMX-DVI.
By default, the unit is configured to buffer single link DVI or HDMI signals.
Using a pushbutton its mode can be changed to support Dual link TMDS signals.
The unit provides driver free USB 1.1 port connection to a PC. Free Windows™ PC
software available on the website, allows reading, saving, manipulating, and writing
EDID tables to and from the device. The EMX-DVI modes (Bypass vs. Emulate or Single-
Link vs Dual-Link buffer) are also controllable via the USB port.
When configured for Single Link extension, often the unit can operate from the
power available through the DVI source signal and no external power supply
connection is required. The unit ships with a universal power supply to use if the
power through the DVI input is insufficient. The power can also come from the USB
connector on a PC.
The Emulated (internal) EDID data can be acquired from any connected LCD (using
LEARN function), or a custom EDID file can be uploaded via the USB port. In addition
to the above, the unit provides DVI-I bypass for analog RGBHV (or VGA) signals, so
it can manage EDID for VGA sources and displays using inexpensive VGA to DVI cables
Using free Hall Research Windows™ software, you will be able to read and save
EDID data from any display. Edit the EDIDs using 3 rd party free software .
- Extend and boost DVI video to 90 ft total
- Pass-through EDID or emulate any LCD
- Can be powered from DVI input or external power supply (included)
- Can Learn and store EDID from any LCD
- Supports Single and Dual-Link DVI, HDMI™, CEC & 3D Video
- LED Indicators for Mode Display
- Analog VGA pass-through
- Use with or without a display
- USB port for control and mgmt of EDID
- Free PC software to download, manipulate or upload EDID data
- Designed and made in USA