Power < 18 Watts
SDI Input/Outputs Up to (4) 75Ω BNC inputs Up to (4) 75Ω BNC outputs SDI Formats Supported: SMPTE 259M, SMPTE 292M, SMPTE 424M SDI Receive Cable Length: 3G/HD/SD: 120/180/320 m (Belden 1694A) SDI Return Loss: >15 dB up to 1.485 GHz; >10 dB up to 2.970 GHz SDI Alignment Jitter: 3G/HD/SD: < 0.3/0.2/0.2 UI Timing Jitter: 3G/HD/SD: < 2.0/1.0/0.2 UI
Framesync Audio/Video Delay Max offset: 20 frames Latency (min): 1 frame
Frame Reference Input Looping 2-BNC connection. SMPTE 170M/318M “Black Burst”, SMPTE 274M/296M “Tri-Level” Return Loss: >35 dB up to 5.75 MHz
User Audio Delay Offset from Video Bulk delay control: -33 msec to +3000 msec. Per-channel delay controls: -800 msec to +800 msec
RGB Color Correction RGB Black Adjust (one per primary): -100% to 100% in 0.1% steps RGB White Adjust (one per primary): 0% to 200% in 0.1% steps RGB Gamma Control (one per primary): 0.125 to 8.0 in 0.001 steps
YCbCr Processing Amp White Adjust (Gain): 0 to 200% in 0.1% steps Black Adjust (Lift): -100% to 100% in 0.1% steps C Gain (Saturation): 0% to 200% in 0.1% steps Color Phase: -360° to + 360° in 0.1 degree steps
YCbCr Clip Y Black hard clip (values limited at or above): -6.8% to 50% in 0.1% steps Y White hard clip (values limited at or below): 50% to 109.1% in 0.1% steps Y White soft clip (values rolled off at): 50% to 109.1% in 0.1% steps CbCr Saturation clip (values limited at or below): 50% to 160% in 0.1% steps
GPIO/COMM (2) GPI configurable to select input routing. (2) GPO configurable to invoke upon input selected. RS-232/485 comm port. All connections via rear module RJ-45 GPIO/COMM jack.
Control/Monitor Interface HTML5 web server/interface via rear-panel 10/100/1000 Ethernet port.
Physical Dimensions (WxHxD): 5.7 x 1.4 x 14.7 in (14.5 x 3.5 x 37.3 cm) Dimensions include connector projections. Weight: 6 lb (2.8 kg)