1.888.902.3309 LIVE CHAT
BBG-1060-TG2-REF1 3G/HD/SD-SDI Signal Generator w CVBS Out/AES/AA by Cobalt Digital

BBG-1060-TG2-REF1 3G/HD/SD-SDI Signal Generator w CVBS Out/AES/AA by Cobalt Digital

In stock (50 items available)
BBG-1060-TG2-REF1 3G/HD/SD-SDI Modular Dual Test Signal Generator with Bouncing Box Active Signal Indication, Bi-Level Sync Out, and Embedded ANC Data Signal Generator offers an easy to use, economical solution to providing comprehensive test signal
  • Brand
    Cobalt Digital
  • SKU
    BBG-1060-TG2-REF1
  • Weight
    7.00 lbs
  • Warranty
    5 Years
  • Condition
    New
  • Status
    Available
Questions? Ask our experts!

GET A QUOTE




The all-new Cobalt® BBG-1060-TG2-REF1 3G/HD/SD-SDI Modular Dual Test Signal Generator with Bouncing Box Active Signal Indication, Bi-Level Sync Out, and Embedded ANC Data Signal Generator offers an easy to use, economical solution to providing comprehensive test signal packages to ensure validity of downstream baseband SDI systems. Two independent generator blocks can be set to offer dual test packages which can be simultaneoulsy outputted.

In addition to numerous high-quality industry-standard test patterns and user static raster import, the BBG-1060-TG2-REF1 also provides ANC data generators that are designed to thoroughly check all standard ANC packages (including CEA 608/708 closed captioning, SMPTE 12M timecode, SMPTE 2020 HANC audio, and SMPTE 2010 SCTE 104 test packets). Custom DID/SDID packages can be added to test non-conventional or custom processing. An ingenious Stress-Test Generator can send intentional error-bearing packets that help flush out unexpected error handing problems in downstream systems – errors are discovered and remedied in testing and setup instead of when carrying on-air programming.

The BBG-1060-TG2-REF1 also provides AES and analog audio test tones (both using 24-bit data), and also provides waveform-based test data over its CVBS video output. A moving-box insertion can be enabled to serve as a dynamic raster confidence check. The BBG-1060-TG2-REF1 can use either of two frame references to provide an output that’s synchronous with house ref, or use its internal ref timing to generate its own ref. A CVBS output offers bi-level reference output, line 21 CEA 608 closed-captioning and VITC waveform test sequences. Audio LTC test sequences are available over embedded, AES, and analog audio as well as via an RS-485 serial port.

Preset save/load allows saving custom settings while allowing one-button revert to factory settings. Layered presets allow invoking changes related only to a specific area of concern while not changing any other processing settings or aspects. The BBG-1060-TG2-REF1 uses a built-in web server that allows control/monitor over computers or smart devices from anywhere accessible over the web; no special apps or plug-ins are required for remote control (can also be remote-controlled using DashBoard™). The compact 1/3-rack size of the BBG-1060-TG2-REF1 allows 3 units to be installed in a 1RU space (an optional mounting tray is available that provides secure mounting of the units to a standard 19” frame).

Features

  • Comprehensive test signal generation for SDI/analog video and baseband discrete audio in an easily integrated standalone unit
  • Easy to use, intuitive, flexible, and far more economical than typical bench equipment
  • Fully-independent dual generator blocks offer simultaneous output of user-configured test packages, or instant user selection between generators via output crosspoint
  • Full array of test stimulus for SDI, including CEA608/708, packetized and waveform timecode, SCTE 104, and AFD
  • Moving-box/motion insertion enable serves as an easy to use dynamic raster confidence check
  • SDI import allows insertion of user static raster/patterns as an alternative addition to standard test pattern outputs
  • DID/SDID authoring allows custom payloads to be written to specific DID/SDID locations as test packets for downstream systems
  • Stress-Test generators provide illegal character, TRS, line length and other error cases that help flush out surprises in downstream error handling tolerance and robustness
  • Full suite of output interfaces – SDI, CVBS, AES and analog audio
  • Convenience RS-485 LTC output works with legacy systems and checks bi-phase LTC/SMPTE 12 correlation in mixed systems
  • Low-power/high-density design – less than 18 Watts
  • Compact footprint – up to 3 units in a 1RU space. Optional tray provides secure captive-fastener mounting of 3 units in a 1RU tray.
  • Web-based user interface/remote control as well as front-panel pushbutton menu-based local control with LCD status/net ID. Also controllable using DashBoard remote control.
  • Five year warranty

SDI Inputs/Outputs
(1) SDI User Input (75Ω BNC)
Up to (4) 75Ω BNC outputs
SDI Formats Supported: SMPTE 259M, SMPTE 292M, SMPTE 424M
SDI Alignment Jitter: 3G/HD/SD: < 0.3/0.2/0.2 UI
Timing Jitter: 3G/HD/SD: < 2.0/1.0/0.2 UI

CVBS Video Output
(1) 75Ω BNC output. CVBS output functional only when selected path is carrying SD-SDI.

Discrete Audio Outputs
AES-3id 75Ω outputs (8 pair (16-Ch) max)
Balanced analog audio outputs (4-Ch max) 
(I/O conforms to 0 dBFS = +24 dBu)
Analog Output Impedance: < 50 Ω
Analog Reference Level: -20 dBFS
Analog Nominal Level: +4 dBu
Analog Max Output Level: +24 dBu (0 dBFS)
Analog Freq. Response: ±0.2 dB (20 Hz to 20 kHz)
Analog SNR: 115 dB (A weighted)
Analog Analog THD+N: -96 dB (20 Hz to 10 kHz)
Analog Crosstalk: -106 dB (20 Hz to 20 kHz)

Timecode Insertion/Burn-In
Burn-in and embedded video output timecode selected via user controls from input video SMPTE embedded timecode and/or audio LTC. Burn-in enable/disable user controls. Configurable for burn-in string of seconds, seconds:frames, seconds:frames:field. User controls for text size and H/V position.

Text Burn-In
(2) independent strings supported. Independent insertions controls for enable/disable and enable upon LOS. User controls for text size and H/V position.

User Audio Delay Offset from Video
Bulk delay control: -33 msec to +3000 msec.
Per-channel delay controls: -800 msec to +800 msec

GPIO/COMM
(2) GPI configurable to select input routing. (2) GPO configurable to invoke upon input selected. RS-232/485 comm port. All connections via rear module RJ-45 GPIO/COMM jack.

Frame Reference Input
(2) reference from frame bus. SMPTE 170M/318M “Black Burst”, SMPTE 274M/296M.
Return Loss: >35 dB up to 5.75 MHz

Free Ground Shipping
We offer free ground shipping on every purchase of $300 and more for US and US territory. Please choose "Free Ground Shipping (UPS/USPS)" option at checkout.

UPS Ground
UPS provides up-to-date tracking information. Ground service takes anywhere from 2-7 working days for delivery depending on destinations.UPS Ground does not deliver on Saturdays, Sundays or Holidays.

USPS Priority Mail/USPS Express Mail For all shipments shipped via USPS, we offer 'DELIVERY CONFIRMATION' number with each package. Difference between tracking number provided by UPS vs USPS Delivery Confirmation number is: Delivery Confirmation status is updated when the delivery has been made or when the package has made it through major USPS stations.

Air Shipment
Air shipments, Overnight, 2nd day and 3 day select methods offer guaranteed delivery time for your shipment. If you are in hurry or in need for the items on schedule, select one of these methods. Up-to-date tracking information is provided with each Air Shipment. AVProSupply has the right to choose between Air shipments to meet or reduce delivery time. For guaranteed delivery of multiple items with expedited shipping, please contact our customer service representative for personalized assistance to get your items delivered to you when you need them.

International Customers
We offer shipping via USPS/UPS for our international customers. You can find different shipping options during checkout.

Most items ordered from AVProSupply will be shipped out from our California Warehouse. Will-Calls are only allowed with Appointment Only - Please call Customer Service to set one up between the hours of 9am to 6pm PST.

PAYMENTS ACCEPTED:

Major Credit Cards: Visa, MasterCard, Discover and American Express.
Paypal: You can select an option of Paying with Paypal in our shopping cart.
Money orders: and personal checks or company checks (may take up to 10 days to clear).
Wire Transfer: ( Bank Transfer ) Only for the amount over $500. Contact us for the bank details.
Phone Orders: To place a phone order please call 1.888.902.3309 or 1.916.246.6264 and one of our Customer Service Representatives will take your order (8:00am - 6.00pm PST).

Purchase order: Fax purchase orders to 1.916.672.2557

We Offer A 30-Day Money Back Guarantee: 
Our main goal is to ensure your complete satisfaction with our service and products. If, for any reason, you are not 100% satisfied with your purchase, you can return it within 30 days of the purchase date for a full refund. Our 30-day money back guarantee applies to all of the products we sell, except for: TVs and monitors 20" and larger, Special Order merchandise, or any item indicated as non-returnable. Shipping is not refundable. Prior to returning your purchase, a Return Merchandise Authorization (RMA) number will be provided to you.

Refunds:
Refunds on returned items will be issued in the same payment form as received from the customer at the time of purchase. Once we receive the product and it passes inspection, we will credit your account. Please allow 3 - 6 business days for a credit to appear on your account.

Exchanges:
If the item was sent back to us for an exchange, please allow 3 - 5 business days for the replacement to be processed.

No Returns/Exchanges on the following:

TVs and monitors 20" and larger
Special Order merchandise
Any item indicated on the website as non-returnable

For more information see our official Return Policy


  • Shipping Info
    We offer free ground shipping on every purchase of $300 and more for US and US territory. We deliver worldwide.
  • Payment Methods

  • Return Policy
    We Offer a 30-Day Money Back Guarantee