Atlona Passive VGA Extender up to 330ft over 1 x CAT5/6/7
Cable (RECEIVER ONLY). Model: AT-VGA100-R
The Atlona passive
VGA receiver unit allows sending a perfect video
signal over 1 x CAT5/6/7 cable up to the distance of 330ft with resolutions up to
1280x1024. These extenders can be mixed and matched with each other. The wall plate
transmitter can be matched with “box” receiver and the other way around
and of course, the wall plate transmitter will perfectly work with wall plate
receiver and “box” transmitter with “box” receiver.
Plug and Play, no drivers or software needed, user will not even notice the
difference when using an extender versus a direct connection. The extenders require
no external power.
Note: The AT-VGA100-R is only a receiver unit, the
transmitter is required (AT-WPVGA-S or AT-VGA100S)
Applications:
The VGA Extenders are a great solution for
many different applications, e.g., classroom, office environment, data-center,
training room and many others where the computer must be placed further away from
the users display.
Features:
- Extend signals up
to 330ft away from the computer on a single low-cost Cat5, 6 or 7 cables.
- No power supplies are needed
- Perfect for extending VGA signal further
away than standard cables may allows.
- Wall plate transmitter is compatible
with “box” receiver and other way around.
- Resolution support
up to 1280x1024
- Plug and Play, no drivers or software needed
- Any
computer is compatible, no limitations
Max. Distance via CAT5
Cable:
- 640x480 pixels (15MHz) – 430ft
- 800x600
pixels (30MHz) – 320ft
- 1024x768 pixels (60MHz) – 250ft
- 1280x1024 pixels (100MHz) – 200ft
1.888.902.3309
LIVE CHAT
