Approvals / Compliance
Standards
DVI-D interface: The system supports resolutions such as 480p, 720p, 1080p or WUXGA (1920 x 1200) @ 60Hz (with reduced blanking) and 24bit color depth.
Hardware compatibility: All computers with DVI-D and USB connections
Cable Guidelines
Important extension distance information
- Recommended cables are CAT7 shielded foiled twisted pairs: Daetwyler 7702 Flexible patch cable Daetwyler 7120 Bulk cable
- CAT6 (or better) shielded twisted pair cable must be used to connect the local and remote units in order to maintain compliance with radio frequency energy emission regulations and ensure a suitably high level of immunity to electromagnetic disturbances
- Note: Distances are achieved using single lengths of trunk/bulk cable. For each break/patch connection reduce distance by 5m (16ft). Preferably patch cables should be of type CAT7 and less than 2m (6.5ft). Patch cables over 2m (6.5ft) must be CAT7.
Resolution |
Frequency |
Patch Connections |
Cable Type |
Distance |
1920x1200 |
60Hz |
0 |
CAT7 |
50 metres |
1920x1200 |
60Hz |
0 |
CAT6a (shielded) |
50 metres |
1920x1200 |
60Hz |
2 |
CAT6a (shielded) |
40 metres |
1920x1200 |
60Hz |
2 |
CAT7 |
40 metres |
Environmental
Operating Temperature: 0 to 40ºC / 32 to 104ºF
Connectors – Local Unit
Computer connections at transmitter (TX) DVI-D male, USB type A (for power only)
Connectors – Remote Unit
Display connections at receiver (RX) DVI-D male
Mechanical
Injection molded ABS cases
45mm / 1.8’’ (w) x 63mm / 2.5’’(d) x 21mm / 0.8’’(h) with 30cm / 12” pigtails
Weight 250g / 0.6 lb per pair
Power
USB powered, 5VDC -2.5W for both RX and TX units combined
Software
Compatible with all known operating systems