| -A | -S | -232 | -SA | -SAP |
Video In | HD15-F | HD15-F | HD15-F | HD15-F | HD15-F |
Video Out | HD15-F | HD15-F | HD15-F | HD15-F | HD15-F |
Audio In | 4-pin Phoenix | - | - | 4-pin Phoenix | 4-pin Phoenix |
Audio Out | - | - | - | - | - |
Serial In | 4-pin Phoenix (replace audio-in) | 4-pin Phoenix | DB9F | DB9F | DB9F |
Serial Out | - | - | - | - | - |
UTP In | - | - | - | - | - |
UTP Out | RJ-45 | RJ-45 | RJ-45 | RJ-45 | RJ-45 |
General Specifications |
Video Support | All VESA modes to WUXGA (1920x1200), RGBHV, RGB Composite (NTSC, PAL, SECAM), S-Video, Component Video Widescreen Modes, HDTV Modes including 1080p, 1080i & 720p |
Resolution / Refresh Rate | MultiView Receiver Dependent |
Required Source Impedence | Video Out: 75 Ohms; Audio Out (if applicable) 600 Ohms maximum; SPDIF Audio models: 75 Ohms |
Required Destination Impedence | Video In: 75 Ohms; Audio In (If applicable) 600 Ohms maximum; SPDIF Audio models: 75 Ohms |
| -A | -S | -232 | -SA | -SAP |
Audio Support | Left/Right Summed Audio 47K ohms input impedance. A source device with 600 ohms maximum output impedance is recommended (analog audio input mode) | - | - | Stereo Audio 10K ohms input impedance. A source device with 600 ohms maximum output impedance is recommended. | Stereo Audio 10K ohms input impedance. A source device with 600 ohms maximum output impedance is recommended. |
Serial Support | - | Simplex-serial, any speed up to 115.2K baud. Transparent to format and protocol. | Any speed up to 115.2K baud (depending on application). Transparent to format and protocol. | Speed fixed at 9600 baud. Transparent to format and protocol. | Speed is adjustable in 9 steps from 1200 to 115.2K baud; format is fixed to 8 data no parity; transparent to protocol. |
Cable Supported | Category 5, 5e and 6 Shielded Twisted-Pair (STP) or Unshielded Twisted-Pair (UTP), low-skew preferred or skew-free cable. Please see the "Recommended UTP" page for more detailed information. |
Cascading Capability | Yes, Video Only |
Compliance | CE; FCC Class A, IC Class A, I.T.E. Device, RoHS |
Power | +5 VDC @ 1.2 Amps max., Consumption: 6 Watts Maximum |
Temperature Tolerance | Operating: 32 to 104°F (0 to-40°C) Storage: -4 to 140°F (-20 to 60°C) |
Humidity Tolerance | Up to 80% Non-Condensing |
Mounting | Rack Mount Standard/Wall Mount Optional |
Enclosure | Steel, Black Powder-Coat Finish |
Size | 1.2"H x 4.2"W x 4.3"D (3.1 x 10.4 x 10.9 cm) |
Weight | 0.6 pound (0.27 kg) |
Skew Compensation | 1.0 pound (0.45 kg) |